Materiales compuestos reforzados con cerámicos amorfos para aplicaciones a altas temperaturas
Abstract
A new hybrid-composite material type for applications on hot surfaces (up to 250°C) was developed, in order to reduce the loss of energy, protect thermal insulation and improve the mechanical resistance and impermeability of the thermal insulation systems. This material is a hybrid-composite with organic polymer matrix mixed with small particles (smaller than 45 μm), like silica and organic fibers. The material may be applied directly on hot surfaces up to 250°C, but for higher temperatures it must be used on thermal insulates which can have lower thickness below 2 cm, saving material costs.
References
Burlhis, H. (1995). Advanced Thermoset Plastics, Advanced Materials & Processes.
Cabrera, G. (1998). Estudios Exploratorios Sobre Potencialidades de Fibras Orgánicas como Elemento Estructural y como Barrera Térmica, Tercer Congreso Internacional de Fibras Naturales. Medellín.
Douglas, K. J., Singh, M., Lei, J-F. & Martin, L. C. (1999). Novel approach for positioning sensor lead wires on SiC based monolithic ceramic and FRCMC components/subcomponents having flat and curved surface. Nasa-Technical support package.
Eo, Y., Kim, D., Bae, B., Seng, K., Lee, T. & Song, S. (1998). J. sol-gel Sci and Tech. 404-413. https://doi.org/10.1023/A:1008665010016
Gardiner, B. (1997). High Performance Thermoplastic Lining Techniques, Materials Performance.
Kickelbick, G. (2007). Hybrid Materials, Synthesis, Characterizations and Applications.Wiley-VCH Verlag GmbH.
Latorre, G. & Vargas, F. (1999). Materiales compuestos orgánicos utilizados como refuerzo de tuberías de conducción de fluidos. CTYF - Ciencia, Tecnología y Futuro, 1 (5): 113-124.
Latorre, G., Vargas, F. & Mena, J. (2001). Conductividad térmica en materiales compuestos con matriz mezcla de polímeros orgánicos e inorgánicos, con refuerzo de fibra orgánica. Memorias del 1er Congreso Internacional de Materiales. Ciencia y Tecnología de Materiales, Citema. Bucaramanga.
Velasco, M. J. (1999). Síntesis y caracterización de ormosiles obtenidos a partir de Teos y Pdms. Tesis doctoral. Universidad Autónoma de Madrid. Facultad de Ciencias. Madrid.
Wachtman, J. B. (1984). High performance ceramics. Advances in processing and properties. Conference on advances in materials technology process industries needs.
Wunderlich, B. (2005). Thermal Analysis of Polymeric Materials. Springer-Verlang.
Yan, Y., Hoshino, Y., Duan, Z., Chaudhuri, S. R. & Sarkar, A. (1997). Chem, mater, 9, 2583-2587. https://doi.org/10.1021/cm970503c
Zöld A. & Szokolay S. V., (1997). Thermal Insulation Design Tools and Techniques. Vol 2 . University of Queensland.
Downloads
Copyright (c) 2009 Creative Commons Reconocimiento-NoComercial-CompartirIgual 4.0.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.