Materiales compuestos orgánicos utilizados como refuerzo de tuberías de conducción de fluidos
Abstract
This paper presents the experimental test and the results of the development of a composite organic material (MCO) for the reinforcement and covering of pipelines. MCO is desinged to be applied to pipelines with external, damages such as dents or gauges or with surface damages caused by corrosion. The product can recover transport lines with 65% thickness losses due to corrosion in lenghts of less than 0,2 m. The system developed by Ecopetrol-ICP can stop progressive picking corrosion, it has an excellent capillary, good adhesion, good resistance in cathodic protection, and mechanical strength that can support the operational pressure of the pipeline. MCO is a mixture of a polymeric resin reinforced with organic fibers, it can be applied to surface or underground pipelines without stopping normal operation. The maximum rupture pressure attained by the MCO was 23,4 MPa in pipelines with a 65% tickness loss due to corrosion. The normal operation pressure is 1 0 - 1 2 MPa.
References
ASME B. 31G, 1991. "Manualfor determining the remaining strength of corroded pipelines".
ASTMB. 117, 1995. "Standard practice for operating salt spray (fog) apparatus".
ASTM D522, 1993. "Standard test method for mandrel bend test of attached organic coatings".
ASTM D638M, 1993. "Standard test method for tensile properties of plastics (metric)".
ASTM D1653, 1993. "Standard test method for water vapour transmission of organic coatings films".
ASTM D2247, 1994. "Standard practice for testing water resistance of coatings in 100% relative humidity".
ASTM D2794, 1993. "Standard test method for resistance of organic coatings to the effects of rapid deformation (impact)".
ASTM D4060, 1995. "Standard test method for abrasion resistance of organic coatings by the taber abraser".
ASTM D4214, 1989. "Standard test methods for evaluating the degree of chalking of exterior paint films".
ASTM D454, 1995. "Standard test method for pull-off strength of coatings using portable adhesion testers".
ASTM D4585, 1992. "Standard practice for testing water resistance of coatings using controlled condensation".
Bolaño, J. y Zapata, L., 1998. "Utilización de un manto en fibra de fique como alternativa de geotextil para solución de problemas geotécnicos", Tesis de Grado en Ingeniería Civil, Universidad Industrial de Santander.
Caicedo, C. , 1996. "Aplicación de la espectroscopía de impedancias en la evaluación del desempeño de los recubrimientos orgánicos", Informe de laboratorio, Ecopetrol - ICP.
CAN/CSA-Z245.20-M, 1992. "External fusion bond epoxy coating for steel pipe".
Franco, M. L. y Mulford, J., 1988. "Evaluación de Recubrimientos con base en asfalto y alquitrán de hulla para tubería enterrada y protegida catódicamente", Tesis de grado en Ing. Química, Universidad Nacional.
Hare, E., 1996. "Coating system design".
ISO 8504-1/2/3, 1992. "Preparation of steel substrates before application of paints and related products. Surface preparation methods".
Kuhlman, C., 1995. "Long-term reliability of gas pipeline repairs by reinforced composites", Southwest Research Institute and Battelle Memorial Institute.
Lee, L. H., 1991. "Fundamentals of Adhesion". https://doi.org/10.1007/978-1-4899-2073-7
Stephens, D. R and Francini, R. B., 1994. "Laboratory and field validation of the long-term performance of composite reinforcement", Paper.
Universidad del Valle, 1997. "Los Mil Usos del Fique", Ciencia al Día , http://aupec.univalle.edu.co.
Varughese, K., 1996. "Mechanical properties critical to pipeline project economics", Paper.
Downloads
Copyright (c) 1999 Creative Commons Reconocimiento-NoComercial-CompartirIgual 4.0.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
