Efecto de las características estructurales de los ácidos nafténicos en la cinética de corrosión de un acero AISI SAE 1005
Resumen
El procesamiento de crudos con alto contenido de ácidos nafténicos causa problemas de corrosión en las unidades de detilación. El Número Total Ácido (TAN) es comunmente usado para evaluar la corrosividad de crudos, y por lo tanto es un parametro usado para la toma de decisiones relacionadas con el control de la corrosión de la refinerias. Sin embargo, el TAN solo representa el número de grupos carboxílicos presentes en el crudo y no considera las características estructurales de los ácidos nafténicos ni su reactividad en las reacciones de corrosión. En este trabajo se desarrolló el fraccionamiento de una mezcla comercial de ácidos nafténicos a partir de la solubilidad de sus respectivas sales. Se determinaron parámetros estructurales característicos de los ácidos nafténicos de cada fracción usando Espectroscopia de Infrarrojo, Cromatografía De Permeación en Gel, Resonancia Magnética Nuclear, Espectroscopia de Masas y Análisis Elemental. Se realizó el estudio cinético de la reacción de corrosión de un acero AISI 1005 expuesto a cada fracción de ácidos nafténicos en el rango de temperatura entre 270 y 350 °C. Finalmente, se propuso un modelo de reacciones paralelas para la predicción de la concentración de hierro disuelto debido a la reacción de corrosión, a partir de la concentración molar de cada una de las fracciones que conforman la mezcla de ácidos nafténicos.
Referencias bibliográficas
Dettman, H.D., Li, N., Luo, J. (2009). Refinery corrosion organic acid structure, and Athabasca bitumen. Corrosion 2009, Nace International (ID 09336), Atlanta, USA
Dettman, Heather; LUO, Jingli. (2010). The influence of naphthenic acid and sulphur compound structure on global crude corrosivity under vacuum distillation. CORROSION.
Yepez, Omar (2007). On the chemical reaction between carboxylic acids and iron including the special case for naphthenic acid. FUEL, 86 (7-8), 1162-1168. https://doi.org/10.1016/j.fuel.2006.10.003
Alvisi, P.P; Lins, Vanesa F.C. (2011) An overview of naphhthenic acid corrosion in a vacuum distillation plant. Engineering Failure Analysis, 18(5), 1403-1406, https://doi.org/10.1016/j.engfailanal.2011.03.019 .
Qu, D.R, et al. (2006). High temperature naphthenic acid corrosion and sulphidic corrosion of Q235 and 5Cr1/2Mo steels in synthetic refining media. Corrosion Science, 48(8), 1960-1985. https://doi.org/10.1016/j.corsci.2005.08.016
Biryukova, OV, et al. (2007). Biodegradation of naphthenic acids by rhizosphere microorganisms. Chemosphere, 67(10), 2058-2064. https://doi.org/10.1016/j.chemosphere.2006.11.063
Saadine, T. (1996). Review of critical factors affecting crude corrosivity. CORROSION, (607).
Mejía, C. Quiroga, H. Laverde, D. Hernandez, M and Goméz, M.A. (2012). A kinetic study of esterification of naphthenic acids from a Colombian heavy crude oil, CT&F-Ciencia Tecnología y Futuro, 4(5), 21-31. https://doi.org/10.29047/01225383.219
Kapusta, D. (2004). Safe processing of acid crudes. CORROSION, 04637.
Dettman, H. Li, N. and Luo, J. (2009). Refinery Corrosion, organic acid structure and Athabasca bitumen. CORROSION, 09336.
Messer, B. Beaton, M. Tarlton, B. and Phillips. (2004). New theory for naphthenic acid corrosivity of Athabasca Oil sands crudes. CORROSION, 04634.
Freitas, S., Malacarne, M.M., Romão, W., Dalmaschio, G.P., Castro, E.V.R., Celante, V.G., Freitas, M.B.J.G. (2013). Analysis of the heavy oil distillation cuts corrosion by electrospray ionization FT-ICR mass spectrometry, electrochemical impedance spectroscopy, and scanning electron microscopy. FUEL, 104, 656-663. https://doi.org/10.1016/j.fuel.2012.05.003
ASTM International. (2012). ASTM G31-12a. Standard Guide for Laboratory Immersion Corrosion Testing of Metals, ASTM International, West Conshohocken, PA.
ASTM International. (2007). ASTM D664-07, Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration, ASTM International, West Conshohocken, PA.
Jego, G, etal. (2013). Calibration and performance evaluation of the STICS crop model for simulating timothy growth and nutritive value. Field Crops Res., 151, 65-77. https://doi.org/10.1016/j.fcr.2013.07.003
Jamieson, P.D, et al. (1991). A test of the computer simulation model ARCHWHEAI on wheat crops grown in New Zeland. Field Crops Res., 27, 337-350. https://doi.org/10.1016/0378-4290(91)90040-3
Muhammad, Khan, et al. (2016). A-non Catalytic supercritical methanol route for effective desacidification of naphthenic acids. Fuel, 182, 650-659. https://doi.org/10.1016/0378-4290(91)90040-3
Rongbao, Li; ZENGMIN, Shen; BAILING, Li. (1988). Structural analysis of polycyclic aromatic hydrocarbons derived from petroleum and coal by 13C and 1H-n.m.r spectroscopy. Fuel, 67(4), 565-569. https://doi.org/10.1016/0016-2361(88)90355-9
Williams, R.B. (1958). Characterization of hydrocarbons in petroleum by nuclear magnetic resonance spectrometry. Am. Test. Mater. Spec. Tech., 224, 168-194. https://doi.org/10.1520/STP46925S
Quian, S.A, et al. (1985). Structural characterization of pitch feedstocks for coke making: use of 13C coupled 1H n.m.r. spectroscopy. Fuel, 64(8), 1085-1091. https://doi.org/10.1016/0016-2361(85)90111-5
Poveda, Juan C, et al. (2012). Average molecular parameters of heavy crude oils and their fractions using NMR spectroscopy. Journal of Petroleum Science and Engineering, 84-85, 1-7. https://doi.org/10.1016/j.petrol.2012.01.005
Wang, Xiaoqi; YONGAN, Gu. (2011). Characterization of Precipitated Asphaltenes and Deasphalted Oils of the Medium Crude Oil-CO2 and Medium Crude Oil-n-Pentane Systems. Energy&Fuels, 25(11), 5232-5241. https://doi.org/10.1021/ef201131n
Jin, Peng; Robbins, W; Bota, G. (2018). Kinetic Reaction Modelling of Naphthenic Acid Corrosion and Sulfidation in Refineries – A Mechanistic Model. CORROSION, 74(12), 1351–1362. https://doi.org/10.5006/2880
Descargas
Derechos de autor 2022 CT&F - Ciencia, Tecnología y Futuro
Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial-CompartirIgual 4.0.