Syngas obtainment from the gasification of asphaltenes of the San fernando crude oil

  • Luz Edelmira Afanador Rey Ecopetrol S.A. – Instituto Colombiano del Petróleo, A.A. 4185 Bucaramanga, Santander, Colombia
  • Jorge Luis Grosso Vargas Universidad Industrial de Santander, Bucaramanga, Santander, Colombia
  • Laura Smith Moreno Arciniegas Universidad Industrial de Santander, Bucaramanga, Santander, Colombia
  • Fabio Ernesto Rodríguez Corredor Universidad Industrial de Santander, Bucaramanga, Santander, Colombia
Keywords: San Fernando crude oil, gasification, asphaltenes, syngas

Abstract

In this work, we developed the first study in Colombia to obtain and evaluate syngas compositions derived from asphaltenes gasification. These asphaltenes came from the implementation of a Deasphalting process to San Fernando crude oil, with the purpose of looking for technological options for their utilization. We performed the design, installation and commissioning of facilities for the gasification of asphaltenes at laboratory scale, it following an experimental methodology, performing nine tests and considering temperature and agent gasification quantity (oxygen) as independent variables. The syngas derived from gasification was analyzed by two chromatographic techniques, which reported the presence of refinery gases and sulfur. We evidenced a growth tendency of
CO, H2 and sulfur composition and a decrease in CH4 and CO2 composition with temperature. The composition of the syngas was evaluated with different quantities of gasification agent (33%, 40% and 47% the amount of oxygen theoretically required for complete combustion) at each temperature levels operated. It was established that when using a 40% of gasification agent, you get greater average content of CO and H2, which are the interest gases in
the gasification process.

References

ASTM D 1552. (2008). Standard test method for sulfur in petroleum products (High-temperature method).

ASTM D 3174. (2004). Standard test method for ash in the analysis sample of coal and coke from coal.

ASTM D 4530. (2007). Standard test method for determination of carbon residue (micro method).

ASTM D 5291. (2002). Standard test methods for instrumental determination of carbon, hydrogen, and nitrogen in petroleum products and lubricants.

ASTM 5504. (2008). Standard test method for determination of sulfur compounds in natural gas and gaseous fuel by gas chromatography and chemiluminescence.

BSI BS 4445. (1969). Schedule of test for gasification and reforming plants using hydrocarbon feedstocks.

Centeno, G., Trejo, F. & Ancheyta, J. (2004). Precipitación de Asphaltene del crudo Maya en un sistema a presión. Sociedad Química Mexicana, (48), 179-188.

Delgado, J. (2006). Asfaltenos.Composición, agregación, precipitación. Mérida ,Venezuela: Escuela de Ingeniería Química, Universidad de los Andes.

Deschamps, A., Dezael C. & Franckowiak, S. (1986). Process for converting heavy petroleum residues to hydrogen and gaseous distillable hydrocarbons. US, 4609456.

Dyk, J.C., Keyser, M. & Coertzen, M. (2006). Syngas production from South African coal sources using sasol-lurgi gasifiers. International Journal of Coal Geology, (65), 243- 253. https://doi.org/10.1016/j.coal.2005.05.007

Furimsky, E. (1999). Gasification in petroleum refinery of 21st century. Oil & Gas Science and Technology, (44), 567 - 618. https://doi.org/10.2516/ogst:1999051

GPA 2166. (1986). Obtaining natural gas samples for analysis by gas chromatography.

Higman, C. & Burgt, M. (2007). Gasification. U.S: Elsevier, 391pp. https://doi.org/10.1016/B978-0-7506-8528-3.00005-5

Hoffman, Z. (2003). Simulation and economic evaluation of coal gasification with sets reforming process for power production. Msc. Thesis, Louisiana State University, Louisiana, 92pp.

Huang, J., Fang, Y., Chen, H. & Wang, Y. (2003). Coal gasification characteristic in a pressurized fluidized bed. Energy & Fuels, (17), 1474-1479.

https://doi.org/10.1021/ef030052k

Kabe, T., Ishihara, A., Qian, E.V., Sutrisna, I. P. & Kabe, Y. (2004). Coal and coal - related compounds. Structures, reactivity and catalytic reactions. Tokio: Elsevier.

Leibold, H., Hornung, A. & Seifert, H. (2008). HTHP syngas cleaning concept of two stage biomass gasification for FT synthesis. Powder Technology, (180), 265 - 270.

https://doi.org/10.1016/j.powtec.2007.05.012

Liu, H. & Kojima, T. (2004). Theoretical study of coal gasification in a 50 ton/day HYCOL entrained flow gasifier. II. Effects of operating conditions and comparison with pilot-scale experiments. Energy & Fuels, (18), 913-917. https://doi.org/10.1021/ef030163j

Marano, J. (2003). Refinery technology profiles gasification and technologies. Energy Information Administration, U.S. Department of Energy, National Energy Technology Laboratory.

Marano, J. (2003). Refinery technology profiles gasification and technologies. Energy Information Administration, U.S. Department of Energy, National Energy Technology Laboratory.

Navarro, L. (2004). Obtención, caracterización y evaluación de las resinas presentes en el crudo castilla. Tesis de maestría. Universidad industrial de Santander, Bucaramanga, 134pp.

Ouyang, Z., Guo, Z., Duan, D., Song, X. & Yu, X. (2005). Experimental study of coal gasification coupling with natural gas autothermal reforming for synthesis gas production. Ind. Eng. Chem. (44), 279-284. https://doi.org/10.1021/ie049711m

Peabody Energy (NYSE:BTU) . (2009). Gasification. US. Peabody Energy website.

Secades, A. (2003). Eliminación de H2S de gases de gasificación en reactores de lecho móvil a presión. Tesis doctoral, Universidad de Zaragoza, Zaragoza, 379pp.

Sharma, A., Takanohashi, T., Morishita, K., Takarada, T. & Saito, I. (2008). Low temperature catalytic steam gasification of HyperCoal to produce H2 and synthesis gas. Fuel, (87), 491-497. https://doi.org/10.1016/j.fuel.2007.04.015

Smith, J. M. (1991). Ingeniería de la cinética química. (Sexta edición). México: McGraw-Hill, 774pp.

Smith, J. M., Van Ness, H. C. & Abbott, M. M. (1997). Introducción a la termodinámica en ingeniería química. (Quinta edición). México: McGraw-Hill, 856pp.

Steynberg, A. & Dry. (2004). Fischer-Tropsch technology. South Africa : Elsevier, 700pp. https://doi.org/10.1016/S0167-2991(04)80458-0 https://doi.org/10.1016/S0167-2991(04)80457-9 https://doi.org/10.1016/S0167-2991(04)80459-2

Texaco. (1995). Texaco gasification process innovative technology evaluation report. U.S. Environmental Protection Agency.

UOP 269. (1990). Nitrogen bases in hydrocarbons by potentiometric titration.

UOP 539. (1997). Refinery gas analysis by gas chromatography.

Wallace, P., Anderson, M., Rodarte, A. & Preston, W. (1998). Heavy Oil Upgrading by the separation and gasification of asphaltenes.Gasification Technologies Conference, San Francisco, California.

Wallace, P., Jonson, K. & Thacker, P. (2001). Integration of solvent deasphalting and gasification. US, 6241874, 05/06/2001.

How to Cite
Afanador Rey, L. E., Grosso Vargas, J. L. ., Moreno Arciniegas, L. S., & Rodríguez Corredor, F. E. (2009). Syngas obtainment from the gasification of asphaltenes of the San fernando crude oil. CT&F - Ciencia, Tecnología Y Futuro, 3(5), 189–203. https://doi.org/10.29047/01225383.457

Downloads

Download data is not yet available.
Published
2009-12-31
Section
Scientific and Technological Research Articles

Altmetric

QR Code

Some similar items: