Characterization of the low alloy steel modified superficially with ions of titanium and nitrogen
Abstract
The three-Dimensional Ion Implantation technique (3DII) causes ions to collide with a solid surface in a perpendicular way regardless of the geometry of the solid (Khvesyuk & Tsygankov, 1997; Dougar-Jabon, Dulce-Moreno & Tsygankov, 2002). The steel AISI SAE 4140 has been used as substrate because of its wide use in the transport of oil industry, the specimens of steel underwent surface modification with Titanium ions (Ti) and the combined ions of titanium and nitrogen (Ti+N), with energy of 10keV for 5min and 10min. The superficially modified and unmodified specimens were characterized by Electrochemical Impedance Spec-troscopy (EIS), noting among the most outstanding results the electrochemical double layer system capacitive characteristics under all tested conditions, the best corrosion performance was obtained for implanted substrates with Ti ions for 10min, having a charge transfer resistance much higher than those implanted with Ti+N and the non-implanted. Additionally it was determined that all the implanted systems can be simulated by using one equivalent circuit with a constant phase element instead of a capacitor and the non implanted substrate from day 15 can be simulated through another equivalent circuit.
References
Chang, M., Su, J., Hu, G., Zhai, B., Meng, D., Sun, L., Chen, Y., Li, Y. & Cui, Y. (2016). Enhancement of corrosion resistance of a biomedical grade NiTi shape memory alloy by cyclic potentiodynamic polarization in PBS solution. Int. J. Electrochem. Sci., 11: 1092-1098.
Cottis, R. & Turgoose, S. (1999). Electrochemical impedance and noise. Houston: NACE International.
Dougar-Jabon, V. D., Dulce-Moreno, J. & Tsygankov, P. A. (2002). High voltage pulse discharge for ion treatment of metals. Rev. Sci. Instrum., 73(2), 828-830. doi:10.1063/1.1429785.
https://doi.org/10.1063/1.1429785
Dugar-Zhabon, V. D., Dulcé-Moreno, H. J., Garnica-Villamizar, H. A. & Valbuena-Niño, E. D. (2012). A new method for surface modifications of carbon steels and alloys. Materials Research, 15(6), 969-973. doi: 10.1590/S1516- 14392012005000133.
https://doi.org/10.1590/S1516-14392012005000133
Dulce-Moreno, H. J., Tsygankov, P. A., Dugar-Zhabon, V., V. Niño, E. D. & Parada, F. F. (2011). Estudio de los haces electrónicos en la descarga eléctrica de alto voltaje a bajas presiones. Puente Revista Científica, 5(2), 21-26.
Escobar, C., Caicedo, J. C., Aperador, W., Delgado, A. & Prieto, P. (2013). Improve on corrosion resistant surface for AISI 4140 steel coated with VN and HfN single layer films. Int. J. Electrochem. Sci., 8: 7591-7607.
Flores-Merino, S. & Paucar-Cuba, K. M. (2003). Evaluación de sistemas de recubrimientos mediante espectroscopia de impedancia electroquímica (ESI). Jornadas SAM/ CONAMET - Simposio de Materiales. Bariloche, Argentina.
Galván, J. C., Larrea, M. T., Braceras, I., Multigner, M. & González-Carrasco, J. L. (2016). In vitro corrosion behaviour of surgical 316LVM stainless steel modified by Si+ ion implantation - An electrochemical impedance spectroscopy study. J. Alloys Compd., 676: 414-427. doi:10.1016/j.jallcom.2016.03.162.
https://doi.org/10.1016/j.jallcom.2016.03.162
Gil, L., Jiménez, L. & Staia, M. (2006). Evaluación del efecto de la aplicación de un recubrimiento de Ni-P sobre la resistencia a la corrosión de la aleación de aluminio 7075- T6. Universidad, Ciencia y Tecnología, 10(39), 115-118.
Hernández, L., Gil, L., Niño, E., Noriega, R. & Angulo, N. (2014). Evaluación experimental de la implantación tridimensional de iones Ti y TiN en la resistencia a la corrosión del acero AISI SAE 4140. XII Jornadas de Investigación UNEXPO. Puerto Ordaz, Venezuela.
Khvesyuk, V. I. & Tsygankov, P. A. (1997). The use of a high-voltage discharge at low pressure for 3D ion implantation. Surf. Coat. Technol., 96(1), 68-74. doi:10.1016/S0257-8972(97)00117-5.
https://doi.org/10.1016/S0257-8972(97)00117-5
Parada-Becerra, F., Cabanzo, R., Dugar-Zhabon, V., Tsygankov, P., Mejia-Ospino, E. & V. Niño, E. D. (2012). Plasma temperature measurement in a hybrid discharge by using optical diagnostics. J. Phys.: Conf. Ser., 370. doi:10.1088/1742-6596/370/1/012054.
https://doi.org/10.1088/1742-6596/370/1/012054
Peña, D., Fontalvo, P., Estupiñán, H., Niño, D. & Vesga, W. (2009). Evaluación experimental de la Resistencia a la corrosión de un acero AISI-SAE 4140 implantado con iones de nitrógeno. Dyna, 76(159), 43-52.
Tsygankov, P., Plata, A., V. Niño, E. D., Ochoa, C., Parada, F., Chacón, C. & Dugar-Zhabon, V. (2011). Estudio de características voltio-ampéricas y peculiaridades de funcionamiento de un vaporizador de arco en vacío. Rev. Col. Fís., 43(2), 458-462.
V. Niño, E. D. & Dougar-Jabon, V. D. (2006). Comportamiento del acero SAE-4140 implantado con iones de nitrógeno en ambientes hidrogenados. Rev. Col. Fís., 38(1), 61-64.
V. Niño, E. D., Dugar-Zhabon, V., Dulce-Moreno, J., Peña- Rodríguez, G., Garnica, H. A. & Tsygankov, P. (2012). Aplicación de descargas simultáneas de alto voltaje y arco eléctrico para el tratamiento superficial avanzado de metales. Iteckne, 9(1), 14-20, doi: 10.15332/iteckne.v9i1.56.
https://doi.org/10.15332/iteckne.v9i1.56
V. Niño, E. D., Peña, D. Y., Reyes, M. S. & Dugar-Zhabon, V. D. (2013). Estudio experimental de la resistencia a la corrosión de un acero al carbono AISI-SAE 1020 implantado con iones de titanio. Rev. LatinAm. Metal. Mat., 33(1), 138-146.
V. Niño, E. D., Salinas, D. V., Peña, D. Y. & Chinchilla, L. F. (2011). Modificación superficial de un acero AISI SAE 1045 mediante la implantación de iones de nitrógeno y titanio. Iteckne, 8(1), 31-36. doi: 10.15332/iteckne.v8i1.259.
https://doi.org/10.15332/iteckne.v8i1.259
Valbuena-Niño, E. D., Dulcé, H. J. & Dugar-Zhabon, V. (2010). Caracterización del acero AISI 4140 implantado por iones de nitrógeno. Rev. Col. Fís., 42(3), 387-392.
Vasilescu, C., Drob, S., Calderon-Moreno, J., Osiceanu, P., Popa, M., Vasilescu, E., Marcu, M. & Drob, P. (2015). Long- term corrosion resistance of new Ti-Ta-Zr alloy in simulated physiological fluids by electrochemical and surface analysis methods. Corrosion Science, 93: 310-323. doi:10.1016/j.corsci.2015.01.038.
https://doi.org/10.1016/j.corsci.2015.01.038